Login | Sign Up
ErrorKey - Search engine for Error codes and messages     
  Cisco IOS  [ 1000 result(s) ]
CISCO 6400 CISCO IOS 
  -  %MMODEM-3-IMAGEIOSINCOMPATMAX : Integrated modem image file [chars] cannot be loaded because it requires an IOS version between [dec].[dec]([dec].[dec]) and [dec].[dec]([dec].[dec]), inclusive CISCO IOS
The integrated modem override file is not compatible with the Cisco IOS release running on this router.
The integrated modem Network Module will be loaded with the default software images. This override file can only be used with specified Cisco IOS releases.
Cisco IOS
Comments
 
  -  %MMODEM-3-IMAGEIOSINCOMPATNOMAX : Integrated modem image file [chars] cannot be loaded because it requires an IOS version of [dec].[dec]([dec].[dec]) or later  CISCO IOS
The integrated modem override file is not compatible with the Cisco IOS release running on this router.
The integrated modem Network Module will be loaded with the default software images. If you wish to use this modem override image file, you must upgrade to the specified Cisco IOS release.
Cisco IOS
Comments
 
  -  %LOADER-0-INVALIDIOS : IOS version incompatible with CIP - must be at least [dec].[dec]  CISCO IOS
This Cisco IOS software release is incompatible with this CIP microcode image.
The Cisco IOS software must be updated to match the CIP version. Report this error to your technical support representative.
Cisco IOS
Comments
 
  -  %TN3270S-4-TN3270_CONFIG_INCOMPATIBLE : IOS sub-codepoint [dec] with length [dec] not understood, 600*ONESEC  CISCO IOS
The TN3270 server received a configuration command from the Cisco IOS newer than CIP expects. Some functionality may not be implemented.
Check that the Cisco IOS release is compatible with the CIP version.
Cisco IOS
Comments
 
  -  %CRYPTO-0-AUDITFAIL : Encryption audit check found the wrong level of encryption in this image  CISCO IOS
The audit check that verifies encryption entitlement within Cisco IOS images either found encryption in a non-encryption image or the wrong strength within a Cisco IOS encryption image. Using the encryption image may violate U.S. Export Laws and Regulations.
Contact your technical support representative to obtain a replacement Cisco IOS image.
Cisco IOS
Comments
 
  -  %C3600-3-BADPLAT : Unknown platform type  CISCO IOS
The Cisco IOS software image does not recognize the motherboard revision of this router. This could indicate either a hardware failure or that the software must be upgraded to recognize newer hardware.
Verify that you are using a recommended Cisco IOS software release for your hardware. Upgrade if necessary. If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Cisco IOS
Comments
 
  -  %SERVICE_MODULE-4-OLDIMAGE : Unit [chars] - router image older than module version - access errors may be seen  CISCO IOS
The Cisco IOS software image does not recognize the PROM software version number on the module. The system displays this message if the PROM has been upgraded to a new version, but the Cisco IOS software image has not been upgraded.
Upgrade the Cisco IOS software image.
Cisco IOS
Comments
 
  -  %SNMP_MGR-4-NOTENABLED : SNMP Manager not enabled (requested by [chars])  CISCO IOS
A Cisco IOS application is attempting to make use of the SNMP manager's services. However, the SNMP manager functionality has not been enabled.
You may enable the SNMP manager services via the snmp-server manager configuration command. Otherwise, the Cisco IOS application that is requesting these services is given in the message. Disable or reconfigure this application so that it no longer tries to make SNMP manager requests.
Cisco IOS
Comments
 
  -  %SNMP_MGR-3-RESPDROP : Insufficient memory to handle response to request id [int]  CISCO IOS
An SNMP response PDU was received, but not enough memory was available to cache the response and return it to the original requesting Cisco IOS application.
If this was only a transient problem, the original SNMP request will likely be resent, another SNMP response will be returned and delivered to the original requesting Cisco IOS application. If this message repeats, then you must free up some memory for the SNMP manager to function. Issue the show memory command to verify whether available memory is low. You may need to reconfigure and/or reload the system to free up some memory. Otherwise, you can disable the SNMP manager functionality via the no snmp-server manager command.
Cisco IOS
Comments
 
  -  %SERVICE_MODULE-4-UNKNOWNALARM : Unit [chars] reports unknown network alarms - alarm status reg = [hex]  CISCO IOS
A recent version of the module operating with an old Cisco IOS software image did not recognize an alarm condition.
Update the Cisco IOS software image on the system. If this does not solve the problem, copy the error message exactly as it appears and report it to your technical support representative.
Cisco IOS
Comments
 
 

 
Cisco IOS (999)
RSP  (1)
 
  Prev   1  2  3  4  5  6  7  8  9  10  Next