Login | Sign Up
ErrorKey - Search engine for Error codes and messages     
  Cisco 6400:IPC  [ 11 result(s) ]
CISCO 6400 
  - %IPC_RSP_CBUS-3-NOBUF: [chars] CISCO 6400
The IPC ran out of memory device (MEMD) buffers.
Reduce the number of applications currently running on the IPC. Copy the error message exactly as it appears, and report it to your technical support representative.
IPC
Comments
 
  - %IPC_RSP_CBUS-3-INVNUM: [chars] ([dec]) CISCO 6400
The IPC application tried to send a message that was larger than IPC could handle. The message was not transmitted.
Copy the error message exactly as it appears, and report it to your technical support representative.
IPC
Comments
 
  - %IPC_RSP_CBUS-3-CARDERR: [chars] CISCO 6400
An IPC card has registered to the IPC master twice. The card malfunctioned and its IPC is not active.
Copy the error message exactly as it appears, and report it to your technical support representative.
IPC
Comments
 
  - %IPC_RSP_CBUS-3-SEATERR: [chars] ([dec]) CISCO 6400
The ID associated with an IPC card is either missing, duplicated, or cannot be created.
Copy the error message exactly as it appears, and report it to your technical support representative.
IPC
Comments
 
  - %IPC_RSP_CBUS-3-MSGERR: [chars] ([dec]) CISCO 6400
The slave IPC cannot register with the master. The slave cannot exchange messages with the master.
Copy the error message exactly as it appears, and report it to your technical support representative.
IPC
Comments
 
  - %IPC_RSP_CBUS-3-NOHWQ: Hardware queue for card at slot [dec] not found CISCO 6400
 IPC messages cannot be transmitted due to a missing hardware queue. The messages were discarded, and subsequent messages will not be transmitted to that card.
Copy the error message exactly as it appears, and report it to your technical support representative.
IPC
Comments
 
  - %RSP-3-BADTURBOIPCMSG: Bad Turbo IPC msg ([chars]): msg=[hex] lastmsg=[hex] hdrsize=[hex] size=[hex] CISCO 6400
An error was discovered in an IPC message.
Copy the error message exactly as it appears, and report it to your technical support representative.

Comments
 
  - %RSP-3-IPC: [chars] [chars] CISCO 6400
An Interprocess Communication (IPC) error occurred. The details about what was attempted and what went wrong will be printed.
Copy the error message exactly as it appears, the router configuration, and all other relevant information and report it to your technical support representative.
RSP
Comments
 
  - %EHSA-3-IPC: [chars] [chars] CISCO 6400
An Interprocess Communication (IPC) error occurred. Details about the error event will be printed.
Copy the error message exactly as it appears, the system configuration, and all other relevant information and report it to your technical support representative.
EHSA
Comments
 
  - %RSP-3-MSFIX: Fixing [chars] by setting to default [chars] CISCO 6400
The characters shown can be on the slave RSP setting or on the master RSP setting. The ROM monitor default slave RSP setting is not synchronized with the system configuration file specifications. During bootup, the system image detects the mismatch and modifies the ROM monitor setting to conform with these specifications. This mismatch most likely occurred because a new RSP was being installed and booted in a high system availability (HSA) environment (dual RSPs) for the first time. Alternatively, in established HSA configurations, this message may result from a previous Interprocess Communication (IPC) error occurring while the HSA environment is reconfigured.
Using the show version or show boot command, determine which slot contains the current slave RSP. Using the show config command, determine which slot has been specified as the default slave RSP. If there is no slave default-slot n command in the configuration file, the value defaults to the highest numbered CPU slot (slot 3 on a Cisco 7507, and slot 7 on a Cisco 7513). If the slot number obtained in Step 1 is the same as the number obtained in Step 2, then no further action is required. You have configured HSA in simple hardware backup mode, and both RSPs are identical. However, if the two slot numbers differ, you have configured HSA in software error protection mode, and will have different images running depending on which RSP is currently the slave RSP. If the slot numbers discovered in Steps 1 and 2 differ, reload your router to ensure that the desired system image is running. After the reload, the slave RSP will match the default slave RSP specified in (or inferred from) the system configuration file. For details of various HSA configuration modes, refer to the Cisco IOS Configuration Fundamentals Configuration Guide. See the "Loading System Images and Configuration Files" chapter (Cisco 7500 series only).
RSP
Comments
 
 

 
RSP  (2)
IPC  (6)
EHSA  (1)
 (1)
ATM Signaling  (1)
 
  Prev   1  2  Next