Login | Sign Up
ErrorKey - Search engine for Error codes and messages     
  ATM Signaling  [ 40 result(s) ]
CISCO 6400 CISCO IOS 
  - %ATMSIG-3-FAILASSERT: [chars] CISCO 6400
ATM signaling found an internal critical error.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATMSIG-3-FAILHALFLEGREM: halfLeg removal failed, removeHalfLeg CISCO 6400
ATM signaling failed. There is a half-leg removal error.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATMSIG-3-FAILHALFLEGREM: 2nd halfleg failed, Get 2nd half leg failure. no ifcb CISCO 6400
ATM signaling failed to remove the second half-leg of a connection.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATMSIG-3-NOMEM: [chars] CISCO 6400
ATM signaling could not allocate memory.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATM-4-ILMIKEEPALIVEFAIL: Restarting ATM signaling and ILMI. Keepalive failure detected. CISCO 6400
Adjacent peer device is not responding to Interim Local Management Interface (ILMI) Keepalive polling.
Check the connection of the ATM interface and the status of the adjacent peer device. Correct them if necessary. Wait and check if ILMI Keepalive comes up again. If the problem persists, copy the warning message exactly as it appears, and report it to your technical support representative.
ATM
Comments
 
  - %ATMSIG-3-NOSVC: no SVC, atmSig_findPartyBlockByRef CISCO 6400
The ATM signal control block was not found for a party message.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATMSIG-3-NOSVC: no SVC, atmSig_input CISCO 6400
The ATM signal control block was not found for an input message.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATMSIG-3-INVPNNIMSG: Invalid msg from routing/pnni: dest proc not valid CISCO 6400
An invalid message was received from routing. The destination process is not valid. It must be a signaling module.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATMSIG-3-INVPNNIMSG: Invalid msg from routing/pnni: NULL SVC CISCO 6400
An invalid message was received from routing. There is no signaling control block.
Contact your technical support representative for assistance.
ATM Signaling
Comments
 
  - %ATM-4-ILMICONFIGCHANGE: CISCO 6400
Restarting ATM signaling and ILMI. peer configuration change detected. Configuration of adjacent peer device has been changed.
Wait for the interface to restart.
ATM
Comments
 
 

 
ATM  (2)
Cisco IOS (4)
ATM Signaling  (29)
LAN Emulation  (5)
 
  Prev   1  2  3  4  Next