| - SCSI transport failed: reason 'reset' SUN|
This message indicates that the system sent data over the SCSI bus, but the data never reached its destination because of a SCSI bus reset. The most common cause of this condition is conflicting SCSI targets.¤Data corruption is possible but unlikely to occur, because this failure prevents data transfer. Fix: Verify that all cables are no longer than six meters, total, and that all SCSI connections are properly terminated. If power surges are a problem, acquire a surge suppressor or uninterruptible power supply. A machine's internal disk drive is usually SCSI target 3. Make sure that external and secondary disk drives are targeted to 1, 2, or 0, and do not conflict with each other. Also make sure that tape drives are targeted to 4 or 5, and CD drives to 6, avoiding any conflict with each other or with disk drives. If the targeting of the internal disk drive is in question, power off the machine, remove all external drives, turn the power on, and from the PROM monitor run the probe-scsi-all or probe-scsi command.
If SCSI device targeting is acceptable, memory co ... Login to see more